How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 16876
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have an xg 250 projector, when first powered on, just as

Customer Question

I have an xg 250 projector, when first powered on, just as it finishes the countdown, the projector powers down, and the lamp light is on. The bulb only had 800 hours on it, but we replaced it any way. Same result with a new bulb. The filter screen is clean, and the fans are working. Any ideas?

You can contact me at***@******.***

Submitted: 10 months ago.
Category: Consumer Electronics
Expert:  Pete replied 10 months ago.

Hi there,

If replacing the bulb didn't help, then the lamp ballast that supplies the power to the bulb is suspect.

Digitron AV can repair it for you:

https://digitronav.com/repair/projector-repair/eiki-projector-repair/

Expert:  Pete replied 10 months ago.

Hi, just checking in on your question, do you need any further assistance?