How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rusty Your Own Question
Rusty
Rusty, Customer Service
Category: Consumer Electronics
Satisfied Customers: 5852
Experience:  Over 20 years electronics experience. How may I help you today?
63817454
Type Your Consumer Electronics Question Here...
Rusty is online now
A new question is answered every 9 seconds

Remote control got set to 2 needs to be 1 to work machine

Customer Question

remote control got set to 2 needs to be 1 to work machine
Submitted: 11 months ago.
Category: Consumer Electronics
Expert:  Rusty replied 11 months ago.

Hello, my name is Rusty. Let's get you fixed up and on your way. Please be sure to rate my service when we are finished.

With the unit stopped, on your recorder's remote control, press functions, select Other Functions, Setup, Setup, Remote Control Code, and select 1. Hold down Enter and 1 for about five seconds to complete, then press Enter to confirm. Let me know if you have any trouble.

Expert:  Rusty replied 11 months ago.

Hi, I see you've made another request. Are you able to see my answer?

Expert:  Rusty replied 11 months ago.
Hello, my name is*****'s get you fixed up and on your way. Please be sure to rate my service when we are finished. With the unit stopped, on your recorder's remote control, press functions, select Other Functions, Setup, Setup, Remote Control Code, and select 1. Hold down Enter and 1 for about five seconds to complete, then press Enter to confirm. Let me know if you have any trouble.

Related Consumer Electronics Questions