How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Pete Your Own Question

Pete
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 15775
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a kenwood kvt512 and what to unlock it

Customer Question

I have a kenwood kvt512 and what to unlock it
Submitted: 5 months ago.
Category: Consumer Electronics
Expert:  Pete replied 5 months ago.

Hi there

Customer: replied 5 months ago.
can u help me unlock my kenwood kvt512
Customer: replied 5 months ago.
if u can please send a whole messsage on how to unlock please
Expert:  Pete replied 5 months ago.

Sorry for the delay, my previous reply appears not to have gone through.

Try using the default reset code, 5227 (KCAR)

* Press numeric key "5" ( 2 times ) and press the Track UP/Next Track key
* Press numeric key "2" ( 3 times ) and press the Track UP/Next Track key
* Press numeric key "2" ( 1 time ) and press the Track UP/Next Track key
* Press numeric key "7" ( 2 times ) and press the Track UP/Next Track key

Your radio will require one of the following procedures.

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that "..." disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# ***** and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations

). "C" should display.
Then using your remote, enter your code.

Enter your number from the remote control unit. Your code number is ***** (KCAR)

* Press numeric key "5" ( 2 times ) and press the Track UP/Next Track key
* Press numeric key "2" ( 3 times ) and press the Track UP/Next Track key
* Press numeric key "2" ( 1 time ) and press the Track UP/Next Track key
* Press numeric key "7" ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!

Also on completion of the code reset procedure, hold the track up button down for 3 seconds.

Customer: replied 5 months ago.
I need you to refund money. Did not solve my problem.....