How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Greg A. Your Own Question

Greg A.
Greg A., Engineer
Category: Consumer Electronics
Satisfied Customers: 8102
Experience:  Engineer / Consultant
5229702
Type Your Consumer Electronics Question Here...
Greg A. is online now
A new question is answered every 9 seconds

I a ve a Garmin nuvi and I need a Bracket to go to the Round

Customer Question

I a ve a Garmin nuvi and I need a Bracket to go to the Round Ball in the Bracket
Submitted: 5 months ago.
Category: Consumer Electronics
Expert:  Greg A. replied 5 months ago.

Hello & Welcome to Just Answer,

Sorry to hear of any issue you are having with your device.

To help you with this issue, may I ask:

1) The FULL Model Number of the device you are working with?

2) WHERE are you trying to mount this device (what vehicle)?

3) Was the original "Bracket" lost at some point?

Thanks

Customer: replied 5 months ago.
Do you Know What I Mean?
Expert:  Greg A. replied 5 months ago.

Hi again,

The term "bracket" is NOT usually used for any component in mounting these devices - in vehicles - so that is why I asked the above questions.

Can you respond to those questions?

Thanks

Customer: replied 5 months ago.
The Bracket That holds The Ball Onto The Nuvil
Expert:  Greg A. replied 5 months ago.

Hi again,

OK - can you look at the back or edge of the device and let me know if you can find a MODEL NUMBER there?

Is SHOULD be printed right after the word NUVI, and be a few digits or characters long (3-5).

Thanks

Expert:  Greg A. replied 5 months ago.

Hi again,

I just now saw what you sent as a "Model" (15E137623), which looks like a Serial Number - for a Nuvi 200w.

I don't know why that did not appear for me earlier, but I can now tell you that Garmin packages the entire mounting system - including the suction cup mount and the "cradle" - which is what I believe your "bracket" is.

I have a link to an Amazon listing, where you can see that mounting system.

Click Here --> http://amzn.to/23jNXNs

NOTES:

- You MAY be able to find this same item locally, at a store that carries a LOT of Garmin units and accessories.

- The Garmin part number for this item is 010-11305-12.

I hope this helps. Please let me know what you find or if you have any other questions.

If this has answered your question(s), please take a moment to rate MY service level (Excellent is my goal) so that I get credit for helping you with this question.
You should see some "stars" to do that, but please let me know if you do NOT see them (you may have to scroll UP or DOWN) or can not use them.

Thanks, ***** *****
--. .-
(im)

Expert:  Greg A. replied 5 months ago.

Hi again,

I see it has been a few days and I just wanted to follow up to see if you have any more questions concerning this issue or if the issue was resolved?

I look forward to any further questions or results that you may have.

Thanks, ***** *****
--. .-
(im)