How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Russell H. Your Own Question

Russell H.
Russell H., Service Tech
Category: Consumer Electronics
Satisfied Customers: 9309
Experience:  8+ years of professional experience
Type Your Consumer Electronics Question Here...
Russell H. is online now
A new question is answered every 9 seconds

Need part model #nn-sn797s se#6477200844

Customer Question

need part for panasonic model #nn-sn797s se#6477200844 made in July 2007
Submitted: 6 months ago.
Category: Consumer Electronics
Expert:  Russell H. replied 6 months ago.
Hi, thank you for contacting My name is Russell. I will do my best to provide the right answer to your question. Did the circuit board inside crack or break? Is it the only circuit board inside it, or are there others (even small ones) ?
Customer: replied 6 months ago.
what i ask,ed was were or how i could get a new plate for the turn table
Expert:  Russell H. replied 6 months ago.
If the platter or plate (rather than the bearing or mount on which it turns) is what is needed......that's called a 'Microwave glass turntable tray', and Sears Parts has it here: (If you would like to buy from a different source, at possibly a few dollars less... let me know and I will search for alternate suppliers.) If this answers your question, please rate my answer. Thanks.