How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 16555
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have installed the device and set the time and

Customer Question

I have installed the device and set the time and programming. The display screen goes blank after I finished programming. Shouldn't the time always be displayed?
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Camille-Mod replied 1 year ago.
Hello... what kind of device are you referring to please?
Customer: replied 1 year ago.
Leviton VPT24 digital timer
Expert:  Camille-Mod replied 1 year ago.
Thank you, ***** ***** move your question to the appropriate category.
Expert:  Pete replied 1 year ago.

Hello,

The display backlight will light up when touched and go out again after 30 seconds to save energy.

It is not possible to set it to stay permanently on.