How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Pete Your Own Question

Pete
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 16300
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

Our model#NN-T945SFX has a code of H97 and will not clear or

Customer Question

Our model#NN-T945SFX has a code of H97 and will not clear or operate.
Do you have a solution to our problem?
Submitted: 10 months ago.
Category: Consumer Electronics
Expert:  Pete replied 10 months ago.

Hi Roy,

Expert:  Pete replied 10 months ago.

Error code H97 indicates a possible failure of the Magnetron, DPC board or the High Voltage Inverter board.

It could also be caused by a loose wire connection between the DPC board and the High Voltage Inverter board.
This failure will require a service technician to diagnose and repair, unless you are qualified in microwave repairs.

Expert:  Pete replied 10 months ago.

Hi Roy, just checking in on your question. How did things turn out for you?