How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Michael Hannigan Your Own Question

Michael Hannigan
Michael Hannigan, Engineer
Category: Consumer Electronics
Satisfied Customers: 11189
Experience:  25+ Years Experience in Field. Master Certified Electronics Tech and Technical Consultant
23511658
Type Your Consumer Electronics Question Here...
Michael Hannigan is online now
A new question is answered every 9 seconds

Have 4 MH230 radios using in a restaurant, using with ear

Customer Question

Have 4 MH230 radios using in a restaurant, using with ear buds, voice sounds buzzie, hard to understand, is there a best way to set channels etc. to fix?
Submitted: 9 months ago.
Category: Consumer Electronics
Expert:  Michael Hannigan replied 9 months ago.

Hello. Thank you for coming to JustAnswer.

Sorry for the delay and thank you for your patience. My name is Michael. I will be helping you with your question today.

Please let me know if there as any additional information that you think might be pertinent to your question. If I don't hear back from you, I'll provide the best answer I can based on the information you've given so far. You will still be able to reply with additional information or questions at any point during our conversation, and I'll revise the my answer accordingly.

Expert:  Michael Hannigan replied 9 months ago.

Yes you can set the channel but make sure they are all set to the same.

Your radio has 22 channels. The channel is the frequency the radio
uses to transmit. Channels 8-14 are FRS 0.5 watt only and all other
channels are GMRS. You will probably be best using one of the channels 8-14.

Also, to minimize interference set the interference eliminator code on the radios to a setting other than 0. They must match each other as well.