How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 17015
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

E in the bottom corner. Won't accept paper.
, E bottom

Customer Question

E in the bottom corner. Won't accept paper.
JA: Sometimes things that you think will be really complicated end up being easy to fix. The Technician I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so he can help you best.
Customer: E bottom left corner. Can't get it to load paper.
JA: Is there anything else important you think the Technician should know?
Customer: Nope
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Technician about your situation and then connect you two. I'll let you know when it is your turn.
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  sowravd85 replied 1 year ago.

Can you tell me the brand and model no. of the printer ?

Customer: replied 1 year ago.
It is a Canon printing Calculator. Model #P23-DH V brand new
Expert:  sowravd85 replied 1 year ago.

Sorry, I am not familier with printing calculators, so I will open the question for the other experts.

Expert:  Pete replied 1 year ago.

Hi,

Check for any stuck fragments of paper inside the machine.

Try pushing a piece of card through it to help remove any stuck pieces of paper that may be trapped inside it.

Let me know if that works?