How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Pete Your Own Question

Pete
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 15767
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

New control4 system. Worked yesterday but had to turn off

Customer Question

New control4 system. Worked yesterday but had to turn off breaker due to construction. Turned breaker back on. Everything powers on and is plugged into Yahama A-RX2050 with output going to HDMI 1 on projecter. I have sound, but no image from any component on projector screen (other than blue screen indicating no input on HDMI 1) I switched the HDMI cable to HDMI 2 on back of projector, but still no image. Thoughts?
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Pete replied 1 year ago.

Hi there,

Try connecting a display monitor to the Control4 system instead of the projector and let me know if you get any output there...