How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Aric Your Own Question
Aric
Aric, Technician
Category: Consumer Electronics
Satisfied Customers: 43674
Experience:  15+ years in the field. Owner of AV Installation, OEM and Repair company
24739752
Type Your Consumer Electronics Question Here...
Aric is online now
A new question is answered every 9 seconds

My pioneer receiver vsx 52 displays error code UE 22

Customer Question

my pioneer receiver vsx 52 displays error code UE 22
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Aric replied 1 year ago.

Hello and sorry you're having problems.

How long have you owned the receiver for and when did the problem occur?

Customer: replied 1 year ago.
The receiver is about 3 years old and it started displaying the error code 2 days ago
Expert:  Aric replied 1 year ago.

Thank you for the reply. Have you tried simply unplugging it from power for 5 minutes and plugging it back in as a soft reboot?

Customer: replied 1 year ago.
No I will try
Expert:  Aric replied 1 year ago.

Okay, I don't have high hopes for this, as the UE22 error is typically generated by cold solder joints in the processor chip- which has been known to be fixed on a user level- but requires removing the top of the receiver. Let me know what happens please.

Expert:  Aric replied 1 year ago.

Do you need any further assistance with this?

Customer: replied 1 year ago.
I started it back up will see if I get the error code again
Expert:  Aric replied 1 year ago.

Okay, so the error code was intermittent then? If so this is generally caused by cold solder joints on the processor chip and it's been known to be cured by heating the chip with a heat gun to reflow the solder over those connections. If you need further assistance let me know. Please do not forget to click the 5 STAR RATING, at the top of the page for my efforts. It is my livelihood and you can follow up at any time if needed.

Related Consumer Electronics Questions