How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Rusty Your Own Question

Rusty
Rusty, Customer Service
Category: Consumer Electronics
Satisfied Customers: 5807
Experience:  Over 20 years electronics experience. How may I help you today?
63817454
Type Your Consumer Electronics Question Here...
Rusty is online now
A new question is answered every 9 seconds

I am currently looking at one of your old posts. How do I

Customer Question

I am currently looking at one of your old posts. How do I reset lamp hours on NEC MT1050 without a remote. It is stuck in standby mode with a brand new lamp
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Jack replied 1 year ago.

Sorry , posted here by mistake and will repost this question

Expert:  Rusty replied 1 year ago.

Hello, my name is Rusty. You can use the buttons on your projector just like you would on your remote. Use the right arrow (+) to select, and use the up and down arrows to navigate after you press the MENU button. That will allow you to reset the lamp hours. Let me know if you have any trouble.

Customer: replied 1 year ago.
The unit has past the 2,000 lamp hr marker. So it is stuck in stand by mode and will not turn on until the lamp hours are reset. So the option to turn on and scroll thru the menu does not exist.