How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Pete Your Own Question

Pete
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 15773
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

SHARP XE-A404- The manual does not specific state how to clear

Customer Question

SHARP XE-A404- The manual does not specific state how to clear the Grand Totals.
We will use register only on Sat. and Sun- 2 days per week. Need to clear all totals
on a daily basis. How do I clear Grand Totals?
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Pete replied 1 year ago.
Hi there. By doing a Z reading, it will clear the grand totals.
Customer: replied 1 year ago.
No, it does not clear any totals. I have ran the report several times and it is retaining the sales info in GT area.Other cash registers I have had, one must enter a certain # ***** press a key, example, put mode to PROG
enter 20 press the RA key, change mode to Z and hit amt. tended... this cleared the Grand Totals.
This Sharp XE A 404 does not instruct one to do that. Just how to run the reports. Z does not clear out
all totals on this one.. Is there something I am missing?
Expert:  Pete replied 1 year ago.
To reset the Z total, press the decimal point . just before pressing the PLU/SUB button.