How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Michael Hannigan Your Own Question

Michael Hannigan
Michael Hannigan, Engineer
Category: Consumer Electronics
Satisfied Customers: 11416
Experience:  25+ Years Experience in Field. Master Certified Electronics Tech and Technical Consultant
23511658
Type Your Consumer Electronics Question Here...
Michael Hannigan is online now
A new question is answered every 9 seconds

Ptc 710 will not received scans it just beeps will not display

Customer Question

ptc 710 will not received scans it just beeps will not display receiving reading barcode
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Michael Hannigan replied 1 year ago.
Hello. My name is***** will be your Primary Care Technician and I can assist you with your question.
I'm assuming this was working previously and then stopped working. If that's the case, you can reboot to the original program by doing the following.
Turn off
REPLACE BATTERIES
KEEP HOLDING DOWN THE [SP] [ENTER] KEY UNTIL YOU RECEIVE A NUMBER WITH A
GREATER SIGN AFTER IT. EXAMPLE 58>
THEN RELEASE THE [SP] [ENTER] KEYS
PRESS THE NUMBER [6] KEY
YOU WILL GET A SCREEN WITH MODEL ON IT. ENTER [59] ON THIS SCREEN,
PRESS [ENTER]
THE NEXT SCREEN WILL HAVE A VERSIION NUMBER FOR THE PROGRAM. ON THIS
SCREEN PRESS AND HOLD DOWN THE [3] KEY UNTIL IT BEEPS 3 TIMES
Restarting with the SP and ENTER keys are what does the reset.
Mike