How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dr. Fix-It Your Own Question
Dr. Fix-It
Dr. Fix-It, Technician
Category: Consumer Electronics
Satisfied Customers: 3024
Experience:  Technical Expert & natural problem solver.
Type Your Consumer Electronics Question Here...
Dr. Fix-It is online now
A new question is answered every 9 seconds

When I press scan on my new BC125AT I get the message "All Channels Locked out".

Resolved Question:

When I press scan on my new BC125AT I get the message "All Channels Locked out". I have tried the Unlock all channels function from the manual, but it makes no difference.

Submitted: 4 years ago.
Category: Consumer Electronics
Expert:  Gina-Moderator replied 4 years ago.

Hi, I’m a moderator for this topic and I wonder whether you’re still waiting for an answer. If you are, please let me know and I will do my best to find a Professional to assist you right away. If not, feel free to let me know and I will cancel this question for you. Thank you!

Customer: replied 4 years ago.
I'm still waiting for a response.

Expert:  Dr. Fix-It replied 4 years ago.

Please bookmark this page, CTRL D please wait.....processing;



Hold "func+L/O" a message should come up asking if I wanted to unlock all freqs, then press "E" for yes...



Input several freqs in an unused bank and press L/O a couple times and then press "Unlock+E" (as per above) should unlock all the frequencies / channels.



reference -

Dr. Fix-It, Technician
Satisfied Customers: 3024
Experience: Technical Expert & natural problem solver.
Dr. Fix-It and other Consumer Electronics Specialists are ready to help you
Customer: replied 4 years ago.
Thank you, XXXXX XXXXX help. It worked. However, I needed to set the hold button before I did the steps you suggested. But now it is stuck on one frequency and won't scan any further. Any suggestions?

Expert:  Dr. Fix-It replied 4 years ago.

Press HOLD again and can press .CLR to return to the previous screen. May then push Srch to rescan.

If is not responding may reset to factory by following steps on page 37 of the manual -