How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask romr2009 Your Own Question

romr2009
romr2009, Electronics Engineer
Category: Consumer Electronics
Satisfied Customers: 1782
Experience:  32 years practical systems experience: computer/phone, automotive, appliance, & electrical control
24179821
Type Your Consumer Electronics Question Here...
romr2009 is online now
A new question is answered every 9 seconds

I have a Yorkville Audiopro Micromix SP12 Powered Mixer. The

Customer Question

I have a Yorkville Audiopro Micromix SP12 Powered Mixer. The unit powers on, the led clipping indicators function as they should but there is almost no output when I hook up the speakers. It has a circuit breaker buttone next to the power switch but it doesn't seem to do anything. What might be the problem?
Submitted: 4 years ago.
Category: Consumer Electronics
Expert:  romr2009 replied 4 years ago.
Hello Sir or Madam and thanks for choosing the JustAnswer.com Electronics category.

  • The Audiopro Micromix SP12 requires 4 ohm speakers.
  • Try connecting (2) 8 ohm speakers in parallel to present a 4 ohm load to the SP12.
-----

http://homerecording.com/bbs/general-discussions/newbies/check-my-gear-suggested-set-ups-my-workstation-141520/



romr2009 and 8 other Consumer Electronics Specialists are ready to help you
Customer: replied 4 years ago.
Not according to the manual but anyway I had tried that
Expert:  romr2009 replied 4 years ago.

 

  • Is there a schematic diagram in the manual?