How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeff Your Own Question
Jeff, Technician
Category: Consumer Electronics
Satisfied Customers: 1124
Experience:  10 years experience in the consumer electronics industry.
Type Your Consumer Electronics Question Here...
Jeff is online now
A new question is answered every 9 seconds

need codes to program a ge universal remote rc24912-e.

Customer Question

need codes to program a ge universal remote rc24912-e.
Submitted: 5 years ago.
Category: Consumer Electronics
Expert:  Jeff replied 5 years ago.
I need more info to help you.

What are you trying to control with the remote?

here is the code search command instructions so you can try every code:

Try using the code search method.

1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
3. Press and quickly release the desired device button (TV, VCR, etc.). The red indicator blinks off once.
4. Press the ON•OFF button repeatedly (up to 300 times) until the device to be controlled turns off. The red indicator blinks off with each button press.
5. Press and release ENTER to install the code.

Note: Code Search starts from the currently stored four digit number under that mode. Sometimes the first code that works with your device may only allow limited functionality (e.g.the MENU button might not work). There may be a code that performs more functions. Continue the code search process until the best code is found.
Expert:  Jeff replied 5 years ago.
Here are the 4 digit codes:

Here are the 3 digit codes: