How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Martin Your Own Question

Martin
Martin, Engineer
Category: Consumer Electronics
Satisfied Customers: 4756
Experience:  16 years, include works in aluminium plant, industrial machinery, military weapons, programming
14666028
Type Your Consumer Electronics Question Here...
Martin is online now
A new question is answered every 9 seconds

How do I program my philips universal remote to my Magnavox

Customer Question

How do I program my philips universal remote to my Magnavox DVD player?
Submitted: 5 years ago.
Category: Consumer Electronics
Expert:  Martin replied 5 years ago.
Hello, welcome to Just Answer. can you tell me the model number of that philips universal remote?
Customer: replied 5 years ago.
It doesnt have one on the remote itself.
Expert:  Martin replied 5 years ago.
Do you have a manual with it, it must be on the top. It might also be in the battery compartment if not on the remote front or back.
Customer: replied 5 years ago.
Inside the remote it says CLO34 Thats all it has inside were the batteries go. I hope this helps
Expert:  Martin replied 5 years ago.
Does the remote look like this: link
Customer: replied 5 years ago.
Very close to that one!
Expert:  Martin replied 5 years ago.
You can get the manual by clicking this link. The direct code might be one of the following: 0441, 0442, 0447, 0599, 0799, 0699, 0247, 0193, 0093, 0598