How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Daniel Your Own Question

Daniel
Daniel , Electrical Engineer
Category: Consumer Electronics
Satisfied Customers: 7897
Experience:  BSEE (Electrical Engineer), 10+ years electronic design experience ,chip, board, component expert
47322625
Type Your Consumer Electronics Question Here...
Daniel is online now
A new question is answered every 9 seconds

PANASONIC TV POWER LIGHT BLINKING

Resolved Question:

PANASONIC TV POWER LIGHT BLINKING
Submitted: 5 years ago.
Category: Consumer Electronics
Expert:  Daniel replied 5 years ago.

Hi there happy to help.

 

A couple ?s to help me help you.....

 

Is the red power light blinking in a pattern? ie, 7 flashes, pause, seven flashes, pause,.........

 

If so what is the number of flashes between pauses?

 

Is the TV on?

 

Will it turn on?

 

Do you see anything on the screen?

 

Let me know and we'll get this figured out.

 

-Jared

 

 



Edited by jaredpoz on 9/14/2010 at 3:04 PM EST
Customer: replied 5 years ago.
2 flashes between pauses

tv will hot turn on

nothing on screen

thanks for your help!
Expert:  Daniel replied 5 years ago.

Hi there, thanks for the info.

 

The problem is a fault on what is called the P-board of your LCD TV. See page 34 of the following document.

 

http://www.scribd.com/doc/2900712/Panasonic-TC32LX600-TV-LCD-Training

 

You can buy the part here.

 

http://cgi.ebay.ie/PSU-Power-supply-Board-Panasonic-LCD-TX-32LX60-P-board-/300458875568?pt=UK_AudioTVElectronics_Video_Televisions&hash=item45f4be9ab0

 

 

I would consider all this good news. Your Power supply board is only 40 bucks. I am always pained when I have to send a replacement power supply to someone with a Plasma that costs over 500 for the part alone.

 

Alot of times you can find failed caps on these things by seeing which ones on the board are "buldged" on the top, but in your case since this part is so cheap, I recommend buying the board and replacing.

 

A person with reasonable technical ability can take the back off of this TV and do this themselves. Might be a good idea to take pics along the way to make sure you reassemble everything properly.

 

Good luck,

 

-Jared

 

If this answer helped you please click the ACCEPT button.

 

 

 



Edited by jaredpoz on 9/14/2010 at 3:49 PM EST
Daniel and 7 other Consumer Electronics Specialists are ready to help you