How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask romr2009 Your Own Question

romr2009
romr2009, Electronics Engineer
Category: Consumer Electronics
Satisfied Customers: 1782
Experience:  32 years practical systems experience: computer/phone, automotive, appliance, & electrical control
24179821
Type Your Consumer Electronics Question Here...
romr2009 is online now
A new question is answered every 9 seconds

my daughters tag reader just stopped working what can i do

Resolved Question:

my daughters tag reader just stopped working what can i do about it.
Submitted: 6 years ago.
Category: Consumer Electronics
Expert:  romr2009 replied 6 years ago.
tiliqurt.

  • Open the battery cover, remove the AAA batteries, re-insert the batteries, secure the battery cover and push the on button.
  • Repeat at least 2 times.
  • If no change, reset the Tag in the LEAPFROG® Connect Application.
http://www.leapfrog.com/etc/medialib/leapfrog/support0/support.Par.76365.File.dat/Tag%20Parent%20Guide.pdf

Reset TAG Reader
In the event your child’s TAG Reader has become corrupted and needs to be repaired,
you can use the Reset function on the Settings tab. Resetting the TAG Reader will
restore all of the software on the device to work correctly, however, it will also erase
any audio fi les that were stored on your Reader. Once the reset has completed, you will
need to go to the On My TAG page to transfer the desired audio fi les back to the TAG
Reader (see page 10). To reset a TAG Reader, you must have the device connected and
turned on.




Edited by romr2009 on 8/31/2010 at 12:01 AM EST
romr2009 and 4 other Consumer Electronics Specialists are ready to help you