How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Pradeep Mallick Your Own Question

Pradeep Mallick
Pradeep Mallick, Engineer
Category: Consumer Electronics
Satisfied Customers: 233
Experience:  2 years of experience .Certified engineer in electronics and telecommunication
29926942
Type Your Consumer Electronics Question Here...
Pradeep Mallick is online now
A new question is answered every 9 seconds

How do I program a DVD Video remote to a Magnavox DVD player

Customer Question

How do I program a DVD Video remote to a Magnavox DVD player without any instructions or codes?
Submitted: 6 years ago.
Category: Consumer Electronics
Expert:  Pradeep Mallick replied 6 years ago.
Hello dear customer.
Firstly Thank you for using just answer.
I am glad to be at your service.

Dear Sir/ Madam

Did you get a manual along with the remote?

Also I can provide you with a list of sites which provide remote unlocking codes for Magnavox.

Would that serve your problem?

Regards
Pradeep
Customer: replied 6 years ago.
No, I didn't get a manual - that is why I am writing for advice.
Expert:  Pradeep Mallick replied 6 years ago.
Thank you for your response.
I do hereby provide a list of sites which provide remote codes for MAGNAVOX-

1. codeformyremote.com
2. universal-remote.net

You shall find your remote codes in the above two sites.

Hope the information provided was helpful.
IF MY SERVICE WAS SATISFACTORY THEN PLEASE REMEMBER TO ACCEPT AND GIVE FEEDBACKS.
Regards
Pradeep.
(THANK YOU AGAIN FOR USING JUST ANSWER.)
Customer: replied 6 years ago.
I still don't know how to program this remote to the DVD player. You have provided websites for the codes but how do I get to that point?
Expert:  Pradeep Mallick replied 6 years ago.
ok Give me some time I shall send you the detailed procedure
Customer: replied 6 years ago.
I will wait for your response
Expert:  Pradeep Mallick replied 6 years ago.
Dear sir
visit this link- it has the procedure and the codes for remotes of various makes.
Also provides service for magnavox
http://www.xdiv.com/remotes/

PLEASE REMEMBER TO ACCEPT IF THE INFORMATION WAS SATISFACTORY.
Regards
Pradeep
Customer: replied 6 years ago.
No, I'm more confused now than before I started and I have programmed many before. Guess I'll just buy new.
Expert:  Pradeep Mallick replied 6 years ago.
Ok as per your wish.
But while purchasing do remember to ask for the manual and the codes.
Regards
pradeep
IF MY SERVICE WAS SATISFACTORY THEN PLEASE REMEMBER TO ACCEPT AND GIVE FEEDBACKS