How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask dileepchacko Your Own Question

dileepchacko
dileepchacko , Engineer
Category: Consumer Electronics
Satisfied Customers: 108
Experience:  electronics and communication, having experience in R&D for electronic systems
26558503
Type Your Consumer Electronics Question Here...
dileepchacko is online now
A new question is answered every 9 seconds

How to fix PCR-T470 error message E001

Customer Question

How to fix PCR-T470 error message E001
Submitted: 6 years ago.
Category: Consumer Electronics
Expert:  dileepchacko replied 6 years ago.
Hi, did you try to restart the PCR-T470?
Customer: replied 6 years ago.
I uplugged it and turned the switch off. When it is turned back on, It gives message to (enter for initialization or clear to abort) I have tried both and cash register is not resetting.
Expert:  dileepchacko replied 6 years ago.
actually the meaning of E001 is "Wrong mode" (Mode switch position changed before finalization).

the solution for that is : Return the mode switch to its original setting and finalize the operation.
dileepchacko and 8 other Consumer Electronics Specialists are ready to help you
Customer: replied 6 years ago.
We tried that. What is considered as original setting. I have tried every setting on the switch.
Expert:  dileepchacko replied 6 years ago.
the mode is depending on, in which mode your operating the cash register

can you please download the operating manual from this link

http://www.casio4business.com/sa/support/downloads/downloads_manuals.html

search PCR-T470

download the pdf file from the website. Please go to the page number 21 and see the detailed about the modes.

Edited by dileepchacko on 7/15/2010 at 6:07 PM EST
Customer: replied 6 years ago.
I have manual and am following instructions to no avail. I will go to page 21 to veiw modes. I need some clarification as to why this is not working.
Expert:  dileepchacko replied 6 years ago.

Hi, If your using one mode for eg: PGM ( program), used for cash register programming. you please do not change the mode until its complete operation. The problem is, if your operating in different mode, In middle of operation you do not change the mode.

 

Thanks and regards

DileepChacko