Recent Feedback
Marantz SR5003 in protect mode.
Optional Information: Make: MarantzModel: SR5003 Already Tried: Disconnected everything and let it sit. In protect mode with rapid flashing indicator.
Hi and welcome to JustAnswer,There are only 3 possible causes for the SR5003 to kick into auto-protect mode:
All speakers have been tested. Right now the receiver is sitting with nothing connected, I unplugged for 30 minutes, plugged it back in and still have the rapid flashing. The Marantz Manual troubleshooting states that the
In some cases, the "STANDBY indicator may blink slowly, twice per second." & also "In rare instances, the unit may enter standby mode and the STANDBY indicator may blink rapidly, 8 times per second. In this case, unplug the power cord and request service at your nearest service center." I have already had it in for warranty and all they did was a button press configuration, but that took 2 weeks just for them to do this. The standby light doesnt flash 8 times per second and still will not turn on, so what do I do next. I will not be without a receiver for 2 weeks just so that they can press buttons to get it to come back on.
I understand and has opened up the question to enable other members of the site to further view your concern. Another answer would be provided should one be available.Again, good luck with the Marantz.This is not a Request for Information but an FYI.