How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask ITPeter Your Own Question

ITPeter
ITPeter, Electronics Engineer
Category: Electronic Musical Instruments
Satisfied Customers: 15775
Experience:  Over 16 years' experience in installing and repairing electronics.
30970729
Type Your Electronic Musical Instruments Question Here...
ITPeter is online now
A new question is answered every 9 seconds

My VGA-7 is suffering from a failed firmware update attempt.

Customer Question

My VGA-7 is suffering from a failed firmware update attempt. Is there something I can do, or should I just find a repair center?
Submitted: 11 months ago.
Category: Electronic Musical Instruments
Expert:  ITPeter replied 11 months ago.

Hi Hannon,

You can try a factory reset:

1. Press and hold the WRITE button while turning the power on.

2. Release WRITE, and then press the WRITE button again to execute the Factory Reset.

3. When the Factory Reset is complete, “U01″ shows in the display.

If that doesn't work, then it will need to be returned to a Roland service center to have the firmware reinstalled using their specialist equipment.

Pete.

Related Electronic Musical Instruments Questions