How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Rusty Your Own Question

Rusty, Music Professional
Category: Electronic Musical Instruments
Satisfied Customers: 5540
Experience:  Sound Engineer, Electrical Issues, Tone Consulting
Type Your Electronic Musical Instruments Question Here...
Rusty is online now
A new question is answered every 9 seconds

I dont have true seperation between neck pickup and bridge.

Customer Question

I dont have true seperation between neck pickup and bridge . When i pan from 12 o clock i get loss of volume to neck pick up and when i turn it all the way shuts it off amd bridge pickup has more conductivity then neck pick up. For example if i take small screw driver and tap i get huge magnetic draw on bridge pickup but not as much on neck pickup
Submitted: 11 months ago.
Category: Electronic Musical Instruments
Expert:  Rusty replied 11 months ago.

Hello, my name is Rusty. Are you saying that it does pick up, just not as loud as the bridge? Are they the same pickups?

Customer: replied 11 months ago.
I'm all set thank you bad pickup
Expert:  Rusty replied 11 months ago.

You're welcome. If you're getting a low signal, it's usually a bad pickup. As long as there is some signal, the wiring tends to be correct. I'm glad you were able to get it working.

Related Electronic Musical Instruments Questions