How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Your Own Question
Mike
Mike, Master Electrician
Category: Electrical
Satisfied Customers: 1425
Experience:  Licensed Master Electrician - OnQ Certified Data Voice Audio Video Installer
11762411
Type Your Electrical Question Here...
Mike is online now
A new question is answered every 9 seconds

I just purchased a horse with a single phase motor with 6

Customer Question

I just purchased a horse walker with a single phase motor with 6 leads and Drum reversing switch wired for 110v. I want to change it to 220v.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: For a while now. My other walker was set up on 220 and worked fine.
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: I have done house wiring and automotive but the Drum switch and going from 110 to 220 has me stumped.
JA: How old is the system in question? And have you consulted an electrician yet?
Customer: new
Submitted: 19 days ago.
Category: Electrical
Customer: replied 19 days ago.
The drum switch has 6 terminals (3 on each side)
Expert:  Sam Irvin replied 18 days ago.

Hello, I can help with your issue. Could I have the make and model number of the horse walker? Also if there is a data plate on the motor that you can see take a picture and upload it here if you can. I will also need the make and model number of the drum switch

Related Electrical Questions