How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin Your Own Question
Kevin
Kevin, Licensed Electrician
Category: Electrical
Satisfied Customers: 2934
Experience:  29 years as a Licensed Electrical Contractor in Illinois, 5 year college Electrical Instructor, Former Electrical Inspector, Diploma in Digital Electronics, Former Illinois Licensed Home Inspector
71008832
Type Your Electrical Question Here...
Kevin is online now
A new question is answered every 9 seconds

How do make an adaptor to go from a 6-50 from my plasma

Customer Question

how do make an adaptor to go from a 6-50 from my plasma cutter to connect to my welder generator which hasd a 14 -50 ttype plug
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: as of today
JA: Do you plan on doing the work yourself?
Customer: yes i have a 4 wire 14-50 caqble and plug and a6-50r recepticle
JA: Anything else we should know to help you best?
Customer: how do i connect the 3 wire to the 4 wire whereas one wire is not in use?
Submitted: 15 days ago.
Category: Electrical
Expert:  Kevin replied 15 days ago.

Hello and welcome to Just Answer. My name is ***** ***** I will be happy to assist you with your electrical question.

1) There is no neutral wire on a NEMA 6-50. Only 2 hots and a ground.

2) Therefore, cap off the neutral with a wirenut as it will not be used.

Expert:  Kevin replied 15 days ago.

Hope this helps………If you have any additional questions, just let me know and I’ll be glad to answer them for you.

Otherwise, don’t forget to rate me before you log Off.

Thanks...............Kevin:)

Expert:  Kevin replied 13 days ago.

Any other questions?

Related Electrical Questions