How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ProGrade Your Own Question
ProGrade, Certified Electrical Contractor
Category: Electrical
Satisfied Customers: 393
Experience:  28+ years exp. - installation, troubleshooting, & repair of commercial, & residential electrical systems.
Type Your Electrical Question Here...
ProGrade is online now
A new question is answered every 9 seconds

I purchased your labor units book back in the 80's. I moved

Customer Question

I purchased your labor units book back in the 80's. I moved a i.5 years ago. At that time I lose my book. Today I need the proper Labor unit to pull a #400 MCM copper wire 400 ft.
JA: Did you double-check the thermostat? And what about the unit's filters?
Customer: What are you talking about
JA: What confuses you?
Customer: I am looking for the amount of hours it will take to pull the wire
JA: Do you plan on doing the work yourself?
Customer: Yes, I am a State Master Electrecian
JA: Anything else we should know to help you best?
Customer: The run is in 3" PVC and there are three wires
Submitted: 28 days ago.
Category: Electrical
Expert:  ProGrade replied 25 days ago.

Welcome to

Labor rate is 4.71 man/hrs per hundred feet = 18.84 man/hrs

Please remember to rate my service before leaving the site. Thank you

Related Electrical Questions