How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike G. Your Own Question
Mike G.
Mike G., Master Electrician
Category: Electrical
Satisfied Customers: 7299
Experience:  Proven Professional 48 years Experience
Type Your Electrical Question Here...
Mike G. is online now
A new question is answered every 9 seconds

Want to wire an Orbit 57009 to a pump relay. My pump is 110.

Customer Question

want to wire an Orbit 57009 to a pump relay. My pump is 110. The relay has L1 In & Out (Red) and L2 In and out (Black). I have 14/2 with black/white/ground for my hot/neutral/ground. Wiring diagram looks like its only for 220. Want to make sure i do it right
JA: How old is the system in question? And have you consulted an electrician yet?
Customer: just purchased
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: not that i can think of
Submitted: 8 months ago.
Category: Electrical
Expert:  Mike G. replied 8 months ago.

Hi,I'm Mike G and I'll be assisting you. What will activate the relay? What is the voltage of the control?

Customer: replied 8 months ago.
Orbit timer #57896
Customer: replied 8 months ago.
Customer: replied 8 months ago.
im replacing an old intermatic 14 day timer which connects to my 3/4 pump. I have an indexer valve so i'll just set it to one zone and have the pump turn on/off. Secondary project will be to replace the indexer valve with individual zones...but thats for another day.
Expert:  Mike G. replied 8 months ago.

Connect power wires the black wire to L1 in and the white wire to L2 in. Connect the pump wires to the outs by the same colors.

Related Electrical Questions