How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Your Own Question
Mike
Mike, Master Electrician
Category: Electrical
Satisfied Customers: 1425
Experience:  Licensed Master Electrician - OnQ Certified Data Voice Audio Video Installer
11762411
Type Your Electrical Question Here...
Mike is online now
A new question is answered every 9 seconds

Good morning I am running some fluorescent light fittings all

Customer Question

Good morning I am running some fluorescent light fittings all surface mounted ,no access to the celling .I am using 20.mm pvc conduit . The problem that I have is where to locate the junction boxes for the switching.
Submitted: 11 months ago.
Category: Electrical
Expert:  JACUSTOMER-724lcq13- replied 10 months ago.
You can run the conduit surface mounted and use surface mounted PVC 1 gang switch boxes. make your connections in the same box as the switch.

Related Electrical Questions