How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Your Own Question
Mike
Mike, Master Electrician
Category: Electrical
Satisfied Customers: 1425
Experience:  Licensed Master Electrician - OnQ Certified Data Voice Audio Video Installer
11762411
Type Your Electrical Question Here...
Mike is online now
A new question is answered every 9 seconds

I have a 3-pendant light fixture. When I was changing

Customer Question

I have a 3-pendant light fixture. When I was changing globes, I turned on light fixture
to have enough light to unscrew the screw in side of one socket. I used a screw driver
and it popped and blew lights out in fixture. (I had on rubber gloves).
Even though I reset circuit breaker, none of pendent lights come on. Is fixture shot?
Submitted: 11 months ago.
Category: Electrical
Expert:  Kevin replied 11 months ago.

Hello and welcome to Just Answer. My name is ***** ***** I will be happy to assist you with your electrical question.

1) Do you have an AC voltmeter available to take voltage measurements directly at the light bulb sockets?

Expert:  ProGrade replied 10 months ago.

Can you upload a picture of the defective lampholder?

Related Electrical Questions