How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AssuredElectrical Your Own Question
AssuredElectrical
AssuredElectrical, Master Electrician
Category: Electrical
Satisfied Customers: 4241
Experience:  Contractor-42+ Years in the ElectricalTrade
53189252
Type Your Electrical Question Here...
AssuredElectrical is online now
A new question is answered every 9 seconds

Need help with wiring a atwood 15026 rooftop heat and air

Customer Question

Need help with wiring a atwood 15026 rooftop heat and air unit to my horse trailer
Submitted: 1 year ago.
Category: Electrical
Expert:  AssuredElectrical replied 1 year ago.

Welcome. My name is ***** ***** would be glad to assist.

Please provide the details needed or issue you are having with the wiring?

The units specs are 115 volts, and 13 amps. You will need a 20 amp circuit minimum for the unit

with hot (L), neutral (N) and ground (G) to the terminal board.

Let me know and we can continue,

Thanks

Customer: replied 1 year ago.
Got the unit installed on trailer and ready to wire the book said brown wire from unit to black wire from trailer there is no brown wire there is a blue or grey wire can't really tell what color it is and a white and a green from unit and black, white, and green from trailer
Customer: replied 1 year ago.
It also says blue wire from unit to white common on trailer and green to green that leaves the white wire from unit with nowhere to go
Expert:  AssuredElectrical replied 1 year ago.

Ok,

The manual shows a terminal block for the connections, yours does not have the terminals?

Is this new or used?

Expert:  AssuredElectrical replied 1 year ago.

See the picture below

Customer: replied 1 year ago.
It is new so how would I wire this right
Customer: replied 1 year ago.
The unit is new the trailer is not
Expert:  AssuredElectrical replied 1 year ago.

The manual shows there to be a terminal block to connect the power.

Did you look at the picture? Does yours not have that terminal block with the labeled terminals as shown?

Do you have a 120 volt circuit breaker panel in the trailer for power?

Or are you using an extension cord to plug in on site?

Related Electrical Questions