How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AssuredElectrical Your Own Question
AssuredElectrical
AssuredElectrical, Master Electrician
Category: Electrical
Satisfied Customers: 4241
Experience:  Contractor-42+ Years in the ElectricalTrade
53189252
Type Your Electrical Question Here...
AssuredElectrical is online now
A new question is answered every 9 seconds

can you tel me if the motor with the cerial no.5kcp84dfk143p

This answer was rated:

can you tel me if the motor with the cerial no.5kcp84dfk143p his the same of 5kcp84dfk143bp if not what the differance?

Welcome. My name is XXXXX XXXXX would be glad to assist.

 

Do you have the information on the second one? Maybe a website or other info, as I am unable to find the 2nd one?

 

I found info on the first one , the 5kcp84dfk143p, but without the 2nd one, it is hard to compare.

 

I found a posting on a site with the 2nd one but it wasn't a motor retailer.

 

This is what it stated on the 2nd one, maybe you can confirm?

120v 60hz Voltage
1660/1330/1050rpm rounds per min circulation

1.0A cont
FUSE UMI 123 130C

2A B-1 INS
7.5MFD/370VAC
40C AMB

Customer: replied 3 years ago.

i whant to replace the motor in vanee 90H NOVO+ (vanmar) and i found one at electric motor warehouse 5kcp84dfk143p i whant to know if the spec. are the same but the serial no. on mine


5kcp84dfk143bp and the spec.are=


120v 60hz Voltage
1660/1330/1050rpm rounds per min circulation


1.0A cont
FUSE UMI 123 130C


2A B-1 INS
7.5MFD/370VAC
40C AMB

Ok, thanks.

 

Based on the specs you posted on yours, the motor 5kcp84dfk143pi s same.

Its specs are:

1650 RPM, 3-Speed
1.0 amps

115 volts
Rotation: CW Lead End
Motor Diameter 3.3"
Sleeve Bearings
Shaft: 3 1/8" 3/8" x 3 1/8"
Double Shafted
2 side studs
Motor Case Length 4.13"
Includes 7.5 MFD Oval Capacitor

 

So, as you see in looking at both, they are the same

RPM and both the same 3 speeds. The 1650 and 1660 are essentially the same on th high speed and all others are the same. There is always a little variance in nameplates but the RPM are the same as per specifications go.

 

Same voltage 115/120

Same amperage at 1.0

Same capacitor at 7.5mfd

 

The only thing on yours, is what the shaft size is and mounting.

 

If it matches, they are the same motors.

AssuredElectrical and 2 other Electrical Specialists are ready to help you