How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Alex Your Own Question
Alex
Alex, Master Electrician
Category: Electrical
Satisfied Customers: 1783
Experience:  Owner of independent electrical contracting company. Licensed Electrical Contractor in CT.
33304076
Type Your Electrical Question Here...
Alex is online now
A new question is answered every 9 seconds

Hi Id like to know how to remove these wires (picture) Th

This answer was rated:

Hi I'd like to know how to remove these wires (picture) Thanks
Hello and Thank you for posting on www.justanswer.com. My name is XXXXX XXXXX I'm here to help you.

I'm sorry but picture did not go through.
What wires are you dealing with?
Customer: replied 4 years ago.

Hi sorry for the delay , it's the wires Inside a lamp to replace a ballast. The pic doesn't go through

You are trying to remove wires from sockets?
Customer: replied 4 years ago.

hum I don't know what they're called might be sockets yes. I'll try sending again I hope I won't get an Access Denied page again


 

Are you trying to replace ballast? Why do you want to remove wires?
Customer: replied 4 years ago.

To remove the defective ballast hooked up with wires to the Under of the lamp fixture. (in a garage .. T8 fluorescents lamps)

You can just cut the wires close to the old ballast and then use wire nuts to hook up the new ballast. You should not need to remove wires from sockets.

Please let me know if that answered your question if not we will continue.
Alex and 2 other Electrical Specialists are ready to help you

Related Electrical Questions