my 3 way Switch does not opperate properly. I have had the red wire both on the black and both not on the black?? not sure what to do now.
I am Rob.
this may help
I will check back in about an hour, way to go
can you post photos or tell me more about what you have in the box and how they are grouped by cables coming in?
I will try again to send a picture. Do you have an e-mail i can use just in case it does not load?
Please let me know if you need any other angle. thank you.
You should have one black screw and two brass screws on the 3 way switches
the red and black wires that are coming from the same cable are the travelers and they go on the brass screws.
the other black wire goes on the black screw, that is the common.
Do you have your 3way switches working yet?
Good morning. Yes it is. My computer kept freezing up. Hit the Accept button and it would just sit there. I went into questions and hit accept and it brought me back into this page were the accept button does not work. I will try again and then contact customer support.
30 years of wiring, from Air Force power plants to basement remodels and anything in-between.