How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike G. Your Own Question
Mike G.
Mike G., Master Electrician
Category: Electrical
Satisfied Customers: 7088
Experience:  Proven Professional 46 years Experience
29848548
Type Your Electrical Question Here...
Mike G. is online now
A new question is answered every 9 seconds

How to wire a two speed motor to a two speed switch

This answer was rated:

How to wire a two speed motor to a two speed switch?
Hi, I'm Mike and I'll be glad to assist you.
  • L1 is for the hot feed wire.
  • A & B are for the black and red from the motor.
  • The white connects to the white feed and the ground to all grounds,
Customer: replied 5 years ago.

Where do I connect the white and black that are the hot wires? The white to the white from the motor, the black to L1 on the switch?

Exactly correct.
Mike G. and other Electrical Specialists are ready to help you

Related Electrical Questions