Electrical Repair Questions? Ask an Electrician for Answers ASAP
A Master Electrician here to help. I am a double qualified; USA & UK electrician.
This flashing light is designed to notify you in the event that a problem hasbeen discovered by flashing the light on the control. Follow instructions onthe flag tag to reset control. First, check the warming product for visual damage. If novisual damage is found, unplug the system from wall outlet. Check that the control is wellconnected to the module. Plug the power cord into the wall outlet and turn the control On.If the product still does not operate after 2 or 3 times trying to reset, disconnect the powercord and contact Sunbeam Consumer Care.
The Flag tag is the instruction tag fitted to the cord near the plug.
Here is the number for Customer service in case it won't reset;
If you presently have no more questions and I have answered your question to your satisfaction please click on the "accept" button. This is the only way I get credited for my time and expertise from the deposit you have already made. Even after "accepting" you can still return to this question at no additional charge should you require more information on this subject at a LATER date. As a show of good faith on both sides I recommend this is the way to proceed now.Your email inbox will have a link back to this question so make sure you save it, or you may simply bookmark this page.Your 100% satisfaction is my goal so please do not "accept" then leave less than positive feedback.Thank you for using Just Answer.