How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Other
Category: Electric Vehicles
Satisfied Customers: 26038
Experience:  Worked on fleet of various electric vehicles, golf carts, scissor lifts and electric booms.
30244710
Type Your Electric Vehicles Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 2003 EZ-GO TXT gas cart. All lights (head and tail)

Customer Question

I have a 2003 EZ-GO TXT gas cart. All lights (head and tail) stopped working. Cart runs OK.
Could not determine anything with my meters. No voltage on wiring at the lights.
Submitted: 1 month ago.
Category: Electric Vehicles
Expert:  Curtis B. replied 1 month ago.

Thanks for giving me the opportunity to work with you! I will do my best to help.

Expert:  Curtis B. replied 1 month ago.

Ezgo usually has fuse under the dash for the head light circuit. If fuse is blown there will be no voltage to the light switch. Did you find a fuse?

Customer: replied 1 month ago.
Curt, it will be a few days before I can check this, since the cart is in another location. Thanks for the prompt response.
Expert:  Curtis B. replied 1 month ago.

OK>

Customer: replied 30 days ago.
Curt, found no fuse box under the dashboard (of my gas vehicle). There are two fuses near the battery terminal. I couldn't tell if this was design or previous owner modification. I have not yet gotten owner's or service manuals for this new project. The fuses looked OK, but it would be no problem to replace them.note: the lights did flicker once (0.5 secs.) during a switch on. Any other suggestions?
Expert:  Curtis B. replied 30 days ago.

Need to get voltmeter and find out where the voltage is lost. With lights flashing once, seems to be a bad connection or fuse holder.