How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Other
Category: Electric Vehicles
Satisfied Customers: 25638
Experience:  Worked on fleet of various electric vehicles, golf carts, scissor lifts and electric booms.
Type Your Electric Vehicles Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Ez go workhorse just stoped will do nothing resistor on sol

Customer Question

ez go workhorse just stoped will do nothing resistor on sol is to hot to touch
JA: What is the model/year of your electric?
Customer: 98
JA: What year is your electric?
Customer: 98 ez go 36 volts
JA: Have you checked all the fuses? Do you have a wiring diagram?
Customer: uyes
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: tryin to trouble shoot something makes the resistor to hot checked sol good the sol gets hot with key off not mashing acc or anything
JA: Anything else you think the mechanic should know?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Electric Vehicle Mechanic about your situation and then connect you two.
Submitted: 3 months ago.
Category: Electric Vehicles
Expert:  Curtis B. replied 3 months ago.

Will the charger come on when attached? Do you have voltmeter to test the voltage at the solenoid/ 36 volts on both cable connections?

Expert:  Curtis B. replied 3 months ago.

I see question is still open , did you see my response?

Expert:  Curtis B. replied 3 months ago.

Does the key switch have 36 volts to it?