How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Other
Category: Electric Vehicles
Satisfied Customers: 672
Experience:  Worked on fleet of various electric vehicles, golf carts, scissor lifts and electric booms.
Type Your Electric Vehicles Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I a regular series ez-go & converted to a pds used motor

Customer Question

I toke a regular series ez-go & converted to a pds used motor that came off a running cart,new wiring harness ,run tow harness new pedal box assy.from ez-go ,I have put 4 controlers on this cart check wiring diagram numeruse times a1to a1 on controller A2
on motor to solenoid side that goes to B+ on controller B- on controller to most -in battery pack ck wires on f&r from top down orange gray green wires green w/black strip to buzzer & red wire also Ido a 5 to reverse on f&r and get no falts.but when I press the pedal it blows the controller iam at a loss hear ,wondering if the motor is bad.
Cranor Cranors custm Carts
Submitted: 6 months ago.
Category: Electric Vehicles
Expert:  Curtis B. replied 6 months ago.

Run a motor test! Here is Ezgo technical , with test , just scroll down the opening page, go down past the manuals to find tests.