How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Other
Category: Electric Vehicles
Satisfied Customers: 26045
Experience:  Worked on fleet of various electric vehicles, golf carts, scissor lifts and electric booms.
30244710
Type Your Electric Vehicles Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Electric Vehicles ez go #2144340: My ex-go cart,(###) ###-####with

Customer Question

My ex-go cart,(###) ###-####with Power wise charger stopped charging. Help!
Submitted: 1 year ago.
Category: Electric Vehicles
Expert:  Curtis B. replied 1 year ago.
Do you have a voltmeter? Check the voltage at the charger receptial on the cart.
Expert:  Curtis B. replied 1 year ago.
If less that 30 volts you have battery or cable problem in the primary circuit. The wires and cables from the charger port to the battery pack, back to the charger port.
Customer: replied 1 year ago.
The voltage at the cart charger port is 37.1 volts.
Expert:  Curtis B. replied 1 year ago.
I assume cart is 36 volts, so it should have come on. Does it do anything? No click when plugged in?
Customer: replied 1 year ago.
I checked all wires and connections with my Digital Multimeter---all were OK. I then jumpered the relay to operate the charger manually and it charged just fine. But with the control board back into the system, it does not turn on. So, I have ordered another control board. One wire connected to the relay showed evidence of charring. I will replace the charred prong.Ray (Electrical Engineer)
Expert:  Curtis B. replied 1 year ago.
Sounds like the problem! Control board has to close the relay. Thanks!