How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 21954
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
9825021
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Its in Limp mode and giving a P0882 code, yes tried

Customer Question

Its in Limp mode and giving a P0882 code
JA: Just to clarify, what's the exact code? And have you tried to reset it?
Customer: yes tried resetting and the same thing is reoccuring also getting a P0750 code
JA: What is the model/year of your Dodge?
Customer: 2012 Dodge Ram 2500 Gasoline
JA: Are you fixing your Ram yourself? What have you tried so far?
Customer: just tried resetting and check the battery
JA: Anything else you want the mechanic to know before I connect you?
Customer: nothing other than its not registering id Drive but accepting everything else
Submitted: 1 month ago.
Category: Dodge
Expert:  sprinkles08 replied 1 month ago.

Hello and welcome to JustAnswer!

You can disregard the P0882, it's setting because of the P0750. P0750 is for the low/reverse solenoid in the solenoid pack on top the valve body. It would require some electrical testing to determine the cause of the issue. The powertrain control module or wiring are possibilities but there is very little chance that the problem isn't the solenoid itself. It's extremely likely that the solenoid pack will need to be replaced.