How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 7512
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

Wont accelerate and check engine light is on.

This answer was rated:

wont accelerate and check engine light is on.

Good afternoon and welcome to JustAnswer!!

My name is ***** ***** I have worked for a Chrysler-Dodge-Jeep dealership for 19 years and I will do my best to help.

If you erase all the codes with a scantool which ones come back active?

Talk soon,

Brad

Customer: replied 4 months ago.

I haven't tried that yet

Customer: replied 4 months ago.

if you have a min I will go do that

Customer: replied 4 months ago.

u1146 and p0842 in the trans and p0700 in the engine is still present

Thanks for the reply!!

I have attached the diagnostics for each code that you will need to follow to determine the issue..

If you need anymore assistance feel free to shoot me a reply and don't forget to RATE before leaving the site so I get credit for helping you today..

Have a great day,

Brad

Customer: replied 4 months ago.

what the most common repair for this issue?

These are not common codes so you will need to follow the chart to determine the issue..

Do you need more help?

Customer: replied 4 months ago.

ya but I have to pull off this one for a while so I can check some other ones.

If you need anymore assistance feel free to shoot me a reply and don't forget to RATE before leaving the site so I get credit for helping you today..

Have a great day,

Brad

Customer: replied 4 months ago.

where is the tcm?

Customer: replied 4 months ago.

what does this mean?

Always perform the CVT Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 28 - DTC-Based Diagnostics/MODULE, Transmission Control (TCM) - Standard Procedure)

God morning..

The TCM is located in the vehicle where the clutch pedal would be... And I attached the CVT - PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE.

If you need anymore assistance feel free to shoot me a reply and don't forget to RATE before leaving the site so I get credit for helping you today..

Have a great day,

Brad

-Brad- and 7 other Dodge Specialists are ready to help you
Customer: replied 3 months ago.
she wanted to take it and trade it in

Related Dodge Questions