How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris
Chris, Shop Foreman
Category: Dodge
Satisfied Customers: 12720
Experience:  Dodge/Cummins and Chrysler Certified Master Tech
12365498
Type Your Dodge Question Here...
Chris is online now
A new question is answered every 9 seconds

Truck threw a 2262 code. Expected it after 140,000 miles.

Customer Question

Truck threw a 2262 code. Expected it after 140,000 miles. Changed out the turbo and cleared the code. Ran the truck and it immediately threw the 2262 code again and went back into limp mode. What else is in this system that could cause this. Having trouble believing I installed a defective turbo from Holset.
JA: Just to clarify, what's the exact code? And have you tried to reset it?
Customer: P2262 and yes I cleared it twice.
JA: What year is your Turbo?
Customer: Not sure, bought it from O'reilly auto parts
JA: Are you fixing your Turbo yourself? What have you tried so far?
Customer: Complete turbo replacement, cleaned all oil and cooling lines, replaced oil and filter and new coolant. Everything looked good going in.
JA: Anything else you want the mechanic to know before I connect you?
Customer: What is next to check?
Submitted: 25 days ago.
Category: Dodge
Expert:  Chris replied 25 days ago.

Hello, my name is ***** ***** I will assist you today. A P2262 is almost always a bad turbocharger, or a sooted up turbo. Never ever see it being anything else. The diag procedure has you first clean it. If the code returns, then you replace it. I think you got a defective one. Get one from the Ram dealer. They are rebuilt/remanufactured by Cummins and have never given me any problems.

Chris

Expert:  Chris replied 25 days ago.
I hope that my answer/ information was helpful and if so would you kindly take a moment to rate my service using the just answer star rating system? I would really appreciate it. If you need further assistance, I will still be able to help you out even after you rate me. Thank you! Chris
Customer: replied 25 days ago.
I wil be in contact. Will replace the turbo again.
Expert:  Chris replied 25 days ago.

Sounds like a good plan.

Chris

Customer: replied 25 days ago.
Cleared the codes; separated the exhaust system before the dpf (clogged); started the truck. Didn't pop a code except for the clogged dpf but still surges and will not exceed 1500 rpm.
Expert:  Chris replied 25 days ago.

Did you have the same issue with the old turbo besides the P2262 code?

Chris

Expert:  Chris replied 20 days ago.

Hello? were you able to see my answer?

Chris