How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Robert R Your Own Question
Robert R
Robert R, ASE Certified Master
Category: Dodge
Satisfied Customers: 3929
Experience:  Dodge Master Certified, Dodge Sprinter Certified
49095596
Type Your Dodge Question Here...
Robert R is online now
A new question is answered every 9 seconds

2012 SPRINTER, TURBO FAILURE. REPLACED TURBO. ONLY CODE IS

Customer Question

2012 SPRINTER, TURBO FAILURE. REPLACED TURBO. ONLY CODE IS P20BE1B. WHICH IT ALREADY HAD BEFORE THE TURBO FAILED. NO POWER. NO CHECK ENGINE LIGHT.
JA: Is the power loss consistent, or does it fluctuate?
Customer: ITS CONSTANT
JA: Are you fixing your Sprinter yourself? What have you tried so far?
Customer: YEAH REPAIRED IT MYSELF. REPLACED TURBO. REPLACED INTERCOOLER. PULLED MANIFOLDS TO MAKE SURE THERE WAS NO DEBRIS IN THERE. RE-ASSEMBLED. RUNS GREAT. JUST NO BOOST OR POWER. SLIGHT WISTLE SOUND UNDER ACCELERATION. RECHECKED ALL THE PLUMBING. NO LEAKS.
JA: What year is your '12 Turbo?
Customer: ?
JA: What confuses you?
Customer: WHAT YEAR IS OUR 2012 TURBO?
JA: Anything else you want the mechanic to know before I connect you?
Customer: NO
Submitted: 1 month ago.
Category: Dodge
Expert:  Robert R replied 1 month ago.

Hello, welcome and thanks for asking your question. My name is*****'m a Certified Auto Technician with 29+ years experience. I will do my best to assist you. please keep in mind that I may need to ask questions of you before I can answer. When you reply please feel free to add as much detailed information as possible pertaining to your concern.

Have you done anything in attempt to repair the P20BE-1B code? I'm thinking that the vehicle may be in "limp" mode due to the P20BE code... ECM is programmed to put the engine in limp mode anytime there is a problem with the DEF system...

At this time you need to fix the P20BE code before going any further..

Keep me posted and let me know if you have any additional questions...

Thank you,

Robert