How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rpmdiag Your Own Question
rpmdiag, Tech and Instructor
Category: Dodge
Satisfied Customers: 6702
Experience:  Since 1975
Type Your Dodge Question Here...
rpmdiag is online now
A new question is answered every 9 seconds

Alarm system will not disarm, Yes, 2007 3500 dodge pu,

Customer Question

Alarm system will not disarm
JA: Have you tried locking and unlocking the driver's side door using the key itself?
Customer: Yes
JA: What is the model/year of your Dodge?
Customer: 2007 3500 dodge pu
JA: Are you fixing your B3500 yourself? What have you tried so far?
Customer: Unlock door with key
JA: Anything else you want the mechanic to know before I connect you?
Customer: I put key in ignition turn to start it starts lights and horn go baluster while running
Submitted: 5 days ago.
Category: Dodge
Expert:  rpmdiag replied 5 days ago.

Hi, I'm Ron and I will be helping you today.
Stand by for a moment while I prepare your answer.

Expert:  rpmdiag replied 5 days ago.

I attached a reset procedure for you to follow. If this does NOT work, then there is a problem with the security system that requires a scan tool to check codes and data.

Thanks, Ron

Customer: replied 5 days ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  rpmdiag replied 5 days ago.

I'm waiting for the phone request.

Thanks, Ron

Customer: replied 5 days ago.
i am still waiting for a response. the material you sent did not fix the problem. i checked for codes and 0 shows up.
Expert:  rpmdiag replied 5 days ago.

I haven't gotten a call request yet.

I did tell you that is it didn't work, there is something wrong. There doesn't have to be codes, but the scan tool is needed to check all the modules. A code reader won't work.

Thanks again and please remember to rate me 5 stars and keep this link in case you need me gain later on.


Expert:  rpmdiag replied 4 days ago.

If you are satisfied with my answer, I would greatly appreciate a 5
star rating now and I will still assist you after you have rated me
too if another question pops up. I don’t get credit for helping you
until you rate me.
Thanks again, Ron