How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Juan Crespo Your Own Question
Juan Crespo
Juan Crespo, ASE Certified Technician
Category: Dodge
Satisfied Customers: 1516
Experience:  A.S.E. Master Technician, Advanced Level, Emissions - Asian, Domestic, & European
19298667
Type Your Dodge Question Here...
Juan Crespo is online now
A new question is answered every 9 seconds

2012 DODGE 5500 DIESEL. dID sHOCKS AND NOW code u010e is on

Customer Question

2012 DODGE 5500 DIESEL. dID sHOCKS AND NOW code u010e is on and wont go out?Double checked all wires and grounds ...fuses ....
JA: Most vehicles have two fuse panels. Have you located both?
Customer: yes
JA: What is the model of your '12 Dodge?
Customer: cab and chassis ram with flat bed
JA: Are you fixing your Ram yourself? What have you tried so far?
Customer: yes , double checked ALL wires , fuses , grounds , anything I might have touched doing the shocks ...nothing abnormal
JA: Anything else you want the mechanic to know before I connect you?
Customer: thats al I have ...
Submitted: 2 months ago.
Category: Dodge
Expert:  Juan Crespo replied 2 months ago.

Hi there.

If everything looks OK underneath and neither the module nor its connector was disturbed, then I don't think you caused the issue; instead, I'm willing to bet there is a glitch in the computer programming as addressed in technical service bulletin 18-012-13 (see attached excerpt). To get this issue resolved, just take the truck to your local dealer and tell them you need the flash update as per the TSB.

Best Regards.

Related Dodge Questions