How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1740
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

Got oil change when I goi in the car the oil light was on

Customer Question

got oil change when I goi in the car the oil light was on went to auto zone code was a oil filter and an oil pressure switch changed that wnt back to auto zone disconnected battery to see if computer would re set still have check ingine and oil pressure light on its a 2014 dodge journey and chance the filter is not good
Submitted: 2 months ago.
Category: Dodge
Expert:  -Brad- replied 2 months ago.

Welcome to JustAnswer!!! My name is***** will be helping you with your question today...

Expert:  -Brad- replied 2 months ago.

What engine do you have?

Expert:  -Brad- replied 2 months ago.

If it's the 3.6 you will have to pull the intake to replace the oil pressure switch. Was this done?

Customer: replied 2 months ago.
3.6 engine yes
Expert:  -Brad- replied 2 months ago.

What P codes are setting?

Customer: replied 2 months ago.
Auto zone said it was reading the oil filter and oil pressure switch both
Expert:  -Brad- replied 2 months ago.

There is no codes for the oil filter... What P codes are setting?

Expert:  -Brad- replied 2 months ago.

Did you use a OEM sensor?

Expert:  -Brad- replied 2 months ago.

Do you see any oil leaks?

Customer: replied 2 months ago.
No oil leaks they plunged in under the dash
Customer: replied 2 months ago.
Have no p code
Expert:  -Brad- replied 2 months ago.

In order to help you fix it I will need to know the P codes. There is a bulletin on replacing the oil pressure switch but I need to know what codes are setting. If you erase the code with a scantool will it come back?

Customer: replied 2 months ago.
Did not try to erase code with a scan tool can I go and get the p code and send it to you it may take 15 minutes or so
Customer: replied 2 months ago.
I will go back to autizone
Expert:  -Brad- replied 2 months ago.

Erase it and see if it comes back and let me know what the exact P code is so I can help you get it fixed..

Customer: replied 2 months ago.
How do I erase it
Expert:  -Brad- replied 2 months ago.

With a scantool...