How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Farhat Your Own Question
Chad Farhat
Chad Farhat, ASE Certified Technician A6 - Electrical / Electronic systems A7 Heating / Air conditioning systems
Category: Dodge
Satisfied Customers: 2770
Experience:  Owner at Carolina Auto Service &Sales , 20 years Experience in Foreign & Domestic vehicles
45790705
Type Your Dodge Question Here...
Chad Farhat is online now
A new question is answered every 9 seconds

I Have a Dodge 2013 Ram 1500 SLT put key in nothing Want

Customer Question

I Have a Dodge 2013 Ram 1500 SLT put key in nothing Want come out of park no ac no Gauges workChecked every fuse i can find Need help Roger
Submitted: 7 months ago.
Category: Dodge
Expert:  Chad Farhat replied 7 months ago.

Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP.

Customer: replied 7 months ago.
ok thanks
Expert:  Chad Farhat replied 7 months ago.

you welcome

have you checked battery cables being loose or corroded , especially positive cable to starter ?

what is the mileage on it?

firs time it happens & it happened suddenly ?

did you check for 12 volts at battery ?

Please let me know

Thank You

Chad Farhat

ASE Certified Technician

Customer: replied 7 months ago.
Battery cables all good has 89000 pulled in house turned it n off went to start it The Ram in the das dose not come on Radio Doorlooks all work
Expert:  Chad Farhat replied 7 months ago.

is there any security light flashing or steady on , you see on dash while you trying to start ?

do you have one or 2 keys for it

12 volt on battery with key switch on start position , do you see 12 volts on it

Customer: replied 7 months ago.
Tryed Different Key The Info That Comes up on middle of dash shows nothing
Expert:  Chad Farhat replied 7 months ago.

since no scanner available at this time, because that is what you need

if the instrument cluster is out ,the antitheft module circuit goes thru it ,so if our cluster not working , the truck want start because the security system preventing it we can try reset it

the cluster could not be working for several reasons , wiring ,bcm module , cluster itself, rear connector of the cluster etc...

have you checked all fuses with a test light ?

Master reset Procedure

1- Disconnect Battery Cables ( Negative & Positive Cables )

2- Hold cables Together for 60 secs ,then let go

3- Wait 15 minutes

4- Make sure all doors are closed

5- Reconnect battery Cables

6- Lock & unlock the vehicles using the key from driver door side (if you have a key fob with no blade key, just lock & unlock using the key fob buttons)

7- Enter the vehicle and attempt to start

Please let me know

Thank You

Chad Farhat

ASE Certified Technician

Customer: replied 7 months ago.
my Fab is nnot keyless
Expert:  Chad Farhat replied 7 months ago.

that is fine , if you have blade key, lock & unlock from driver door