How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1753
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

Truck died, no fuel. replace lift pump, no pwer to lift pump

Customer Question

truck died, no fuel. replace lift pump, no pwer to lift pump now?
JA: Has the vehicle turned into a gas hog? And how does it start -- same as usual?
Customer: diesel. started fine. not at all now
JA: What is the model/year of your Dodge?
Customer: 04.5 2500 diesel 4x4
JA: Are you fixing your 2500 yourself? What have you tried so far?
Customer: yes, just tracing power checking relays and fuses. There isnt one specific to the lift pump
JA: Anything else you want the mechanic to know before I connect you?
Customer: I dont know
Submitted: 7 months ago.
Category: Dodge
Expert:  Juan Crespo replied 7 months ago.

Hi there.

There should be a 5-pin fuel pump relay in the Integrated Power Module (IPM). Would you like me to help you testing it and its circuits? If yes, do you have a digital voltmeter you can use for the tests?

Expert:  Juan Crespo replied 7 months ago.

By the way, can you verify the 8th digit of the VIN as being the letter "C"?

Customer: replied 7 months ago.
c
where is the ipm
Customer: replied 7 months ago.
i have a meter
Customer: replied 7 months ago.
hello?
Expert:  Juan Crespo replied 7 months ago.

The IPM is what Dodge calls the combination of the Power Distribution Center (PDC) and Front Control Module (FCM) - PDC is basically the old fuse box where all fuses and relays are under the hood.

I'll need a few minutes to upload the graphics you'll need for the tests. Back in a bit...

Customer: replied 7 months ago.
i cant make this an all day deal just to get intel. there is no fuse or relay in the fuse block fore the pump. I dont know where else to look but i can find out my self if you are to busy to walk me through this.
Expert:  Juan Crespo replied 7 months ago.

It's actually been only 17 minutes since your last reply, but it looks like you're in too much of a hurry for me to be able to help. I'll opt out and let others try. Please don't accept, rate or reply until another expert responds or the site will cycle this back to me.

Customer: replied 7 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 7 months ago.
is there any body there